Commit d980cc06 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'devicetree-fixes-for-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Drop 'resets' as required on renesas,du

 - Moving of fixed string patterns for 'properties' instead of
   'patternProperties'

 - Drop more redundant minItems/maxItems that we merged in the merge
   window

 - Indentation warning fix for sja1105

* tag 'devicetree-fixes-for-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: display: renesas,du: Make resets optional on R-Car H1
  dt-bindings: Move fixed string 'patternProperties' to 'properties'
  dt-bindings: More dropping redundant minItems/maxItems
  dt-bindings: net: dsa: sja1105: Fix indentation warnings
parents 5f06a790 50d8d7e1
......@@ -50,7 +50,6 @@ properties:
reg:
minItems: 1
maxItems: 3
items:
- description: base register
- description: power register
......
......@@ -92,7 +92,6 @@ required:
- reg
- clocks
- interrupts
- resets
- ports
allOf:
......
......@@ -39,17 +39,7 @@ properties:
reg:
maxItems: 1
patternProperties:
"^adi,bypass-attenuator-in[0-4]$":
description: |
Configures bypassing the individual voltage input attenuator. If
set to 1 the attenuator is bypassed if set to 0 the attenuator is
not bypassed. If the property is absent then the attenuator
retains it's configuration from the bios/bootloader.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
"^adi,pwm-active-state$":
adi,pwm-active-state:
description: |
Integer array, represents the active state of the pwm outputs If set to 0
the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
......@@ -61,6 +51,16 @@ patternProperties:
enum: [0, 1]
default: 1
patternProperties:
"^adi,bypass-attenuator-in[0-4]$":
description: |
Configures bypassing the individual voltage input attenuator. If
set to 1 the attenuator is bypassed if set to 0 the attenuator is
not bypassed. If the property is absent then the attenuator
retains it's configuration from the bios/bootloader.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
required:
- compatible
- reg
......
......@@ -28,14 +28,12 @@ properties:
- description: configuration registers for MMU instance 0
- description: configuration registers for MMU instance 1
minItems: 1
maxItems: 2
interrupts:
items:
- description: interruption for MMU instance 0
- description: interruption for MMU instance 1
minItems: 1
maxItems: 2
clocks:
items:
......
......@@ -57,7 +57,6 @@ properties:
ranges:
minItems: 1
maxItems: 3
description: |
Memory bus areas for interacting with the devices. Reflects
the memory layout with four integer values following:
......
......@@ -84,7 +84,6 @@ properties:
interrupts:
minItems: 1
maxItems: 3
items:
- description: NAND CTLRDY interrupt
- description: FLASH_DMA_DONE if flash DMA is available
......@@ -92,7 +91,6 @@ properties:
interrupt-names:
minItems: 1
maxItems: 3
items:
- const: nand_ctlrdy
- const: flash_dma_done
......@@ -148,8 +146,6 @@ allOf:
then:
properties:
reg-names:
minItems: 2
maxItems: 2
items:
- const: nand
- const: nand-int-base
......@@ -161,8 +157,6 @@ allOf:
then:
properties:
reg-names:
minItems: 3
maxItems: 3
items:
- const: nand
- const: nand-int-base
......@@ -175,8 +169,6 @@ allOf:
then:
properties:
reg-names:
minItems: 3
maxItems: 3
items:
- const: nand
- const: iproc-idm
......
......@@ -67,8 +67,8 @@ properties:
reg:
oneOf:
- enum:
- 0
- 1
- 0
- 1
required:
- compatible
......
......@@ -77,6 +77,34 @@ properties:
Type-C spec states minimum CC pin debounce of 100 ms and maximum
of 200 ms. However, some solutions might need more than 200 ms.
refclk-dig:
type: object
description: |
WIZ node should have subnode for refclk_dig to select the reference
clock source for the reference clock used in the PHY and PMA digital
logic.
properties:
clocks:
minItems: 2
maxItems: 4
description: Phandle to two (Torrent) or four (Sierra) clock nodes representing
the inputs to refclk_dig
"#clock-cells":
const: 0
assigned-clocks:
maxItems: 1
assigned-clock-parents:
maxItems: 1
required:
- clocks
- "#clock-cells"
- assigned-clocks
- assigned-clock-parents
patternProperties:
"^pll[0|1]-refclk$":
type: object
......@@ -121,34 +149,6 @@ patternProperties:
- clocks
- "#clock-cells"
"^refclk-dig$":
type: object
description: |
WIZ node should have subnode for refclk_dig to select the reference
clock source for the reference clock used in the PHY and PMA digital
logic.
properties:
clocks:
minItems: 2
maxItems: 4
description: Phandle to two (Torrent) or four (Sierra) clock nodes representing
the inputs to refclk_dig
"#clock-cells":
const: 0
assigned-clocks:
maxItems: 1
assigned-clock-parents:
maxItems: 1
required:
- clocks
- "#clock-cells"
- assigned-clocks
- assigned-clock-parents
"^serdes@[0-9a-f]+$":
type: object
description: |
......
......@@ -36,12 +36,12 @@ properties:
switching frequency must be one of following corresponding value
1.1MHz, 1.65MHz, 2.2MHz, 2.75MHz
patternProperties:
"^ldo[1-4]$":
ldortc:
type: object
$ref: regulator.yaml#
"^ldortc$":
patternProperties:
"^ldo[1-4]$":
type: object
$ref: regulator.yaml#
......
......@@ -83,7 +83,8 @@ properties:
unevaluatedProperties: false
"^vsnvs$":
properties:
vsnvs:
type: object
$ref: regulator.yaml#
description:
......
......@@ -30,7 +30,6 @@ properties:
maxItems: 1
clocks:
minItems: 2
items:
- description: PCLK clocks
- description: EXTCLK clocks. Faraday calls it CLK1HZ and says the clock
......
......@@ -79,22 +79,7 @@ properties:
description:
The SPI controller acts as a slave, instead of a master.
allOf:
- if:
not:
required:
- spi-slave
then:
properties:
"#address-cells":
const: 1
else:
properties:
"#address-cells":
const: 0
patternProperties:
"^slave$":
slave:
type: object
properties:
......@@ -105,6 +90,7 @@ patternProperties:
required:
- compatible
patternProperties:
"^.*@[0-9a-f]+$":
type: object
......@@ -180,6 +166,20 @@ patternProperties:
- compatible
- reg
allOf:
- if:
not:
required:
- spi-slave
then:
properties:
"#address-cells":
const: 1
else:
properties:
"#address-cells":
const: 0
additionalProperties: true
examples:
......
......@@ -25,14 +25,12 @@ properties:
interrupts:
minItems: 1
maxItems: 2
items:
- description: Host controller interrupt
- description: Device controller interrupt in isp1761
interrupt-names:
minItems: 1
maxItems: 2
items:
- const: host
- const: peripheral
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment